JASO D611 STANDARD PDF
July 7, 2021 | by admin
Automotive Cables to ISO, SAEJ, JASO D Automotive Cables. APPLICATIONS OVERVIEW. Standard wall automotive cables are ideal for use in. AVSS Automotive Wire JASO D Construction (No./mm), calculated area ( mm2), Outer Diameter (mm), Standard (mm), Min. (mm), Standard (mm), Max. AVSS Japanese Standard Automotive Cable Conductor:Cu-ETP1 bare according to JIS Insulation:PVC Standard Compliance:JASO D
|Published (Last):||23 July 2014|
|PDF File Size:||7.15 Mb|
|ePub File Size:||9.9 Mb|
|Price:||Free* [*Free Regsitration Required]|
When marking is applied on the cable surface to identify the type and nominal size of a cable, it shall not be easily erasable. However, since cables are maso handled with these multiple symbols, serial indication of multiple symbols was adopted to avoid confusion.
The idea was not adopted because those indications are not made worldwide and because of a problem related to manufacturing equipment difficulty of application to extremely thin cables. Halogen-free insulated low-voltage cables for automobiles AVS: To check the rated voltage, refer to the naso or symbol and nominal size” indicated on the cable, cable frame, or bundle.
In addition, some nominal sizes include “f”, and the note “The symbol ‘f’ in the ‘Nominal size’ column means Explanatory notes 2 The organization and integration of types and symbols require the understanding and cooperation of many relevant people, and a temporary increase in the types and symbols in These shall be organized and integrated at the next regular review of the 0.
The burning cable shall self extinguish within 15 seconds after exposure to naked flame.
The types and symbols are summarized and described in Table 1. Construction and material 5. Normative reference The following standards, when referred to in this standard, constitute a part of the specifications of this standard.
AVSS Automotive Wire JASO D611
Scope This standard specifies low-voltage cables hereinafter referred to as “cables” used as unscreened single-core low-voltage cables for automobiles, excluding AV low-voltage cables for automobiles specified in JIS C Outline and background of revision 1.
However, the use of “f” is neither consistent nor clear. Minimum number of abrasion cycles shall be as specified in Table Jawo insulation shall not be fractured when the specified voltage is applied.
The tests requiring different performance depending on the nominal size standrad described in Table 8 to Initially, the international standard ISO for automotive cables also contained no specifications about rated voltage, but in the revision innew rated voltage classes of 60 V and V were provided and their voltage resistance requirements were clearly specified considering the development of new 42 V automotive electric system and the expanding trend of electric vehicles.
Test method detail item 6. Matters related to patent rights This standard includes no matters related to patent rights. However, gasoline, diesel fuel, and engine oil must be always tested.
The situations are described below. In addition, the necessity and method of voltage indication must be discussed to establish its future direction. Minimum values shall be as specified in Table 8.
AVSS JASO D | Balaji Wires
The heat resistance A test shall be conducted in accordance with the method stanard in 5. In addition, indication of rated voltage is not specified in ISO Thin wall low-voltage cables for automobiles, type 2 HFSS: For this reason, the current details are applied unchanged. This shall be organized at the next regular review of the standard. Cross-linked vinyl insulated heat resistant earth bond low-voltage cables for automobiles AEX: The construction shall conform to the applicable standard in Tables 11 to 25 when the test is conducted according to Item 6.
The meanings of the heat resistant are as follows. As required, the most recently jaeo version of the applicable standard including addenda shall be applied. For the insulation materials, polyvinyl chloride mixture, halogen-free mixture, cross-linked PVC mixture, heat resistant PVC mixture, and cross-linked polyethylene mixture are used depending on the heat resistance class, and have a different temperature rating.
These types and wtandard must be organized and integrated in accordance with ISO standards in order to increase international competitiveness in the future. Conductor Number of Calculated Nominal Approx.
For other fuels, the test shall be performed upon an agreement between the parties involved in delivery. Therefore, all materials are described in Table 1. After study by the Electrical and Electronic Equipment Subcommittee and the Standardization Board, the revision was approved and determined at the standardization meeting in March The symbol “f” in the “Nominal size” jso means flexible conductor.